Pumps & Motors

Mud pump assemblies, grout pumps, and components

Mission-style centrifugal pumps for mud mixing, transfer, and recirculation systems

Progressive cavity and piston pumps for grout, cement, and bentonite slurry

Air-operated double-diaphragm pumps for mud transfer and dewatering

Sand pumps, pit pumps, hydraulic-driven water pumps, and progressive cavity pumps

Wear parts, seals, gaskets, and power frames for Bean, FMC, Aplex, and Mud Puppy pumps

Replacement cylinders, pistons, valve kits, packing kits, and fluid end components for FMC and Gardner Denver mud pumps

Replacement cones, elbows, and clamps for hydrocyclone desander systems

4-inch residential submersible pumps from Berkeley, Goulds, Grundfos, and Shakti for domestic water wells, ranging from 1/2 HP to 5 HP with flow rates from 7 to 50+ GPM.

High-capacity 6-inch through 10-inch submersible pump ends from Berkeley and Flowserve for municipal, irrigation, and industrial applications, rated from 5 HP to 150 HP with flows up to 2,250 GPM.

Centripro 4-inch submersible motors for residential and light commercial wells, available in single and three phase from 3/4 HP to 7.5 HP at 230V.

6-inch submersible motors from Centripro, Hitachi, Wilo, and SME for commercial and municipal wells, covering 5.5 HP to 50 HP in 230V and 460V configurations.

Large-diameter submersible motors from Hitachi and Byron Jackson for high-capacity wells, ranging from 40 HP to 300 HP at 460V three phase.

Flowserve vertical turbine pump bowl assemblies in 10-inch and 12-inch bore sizes with oil-lubricated bearings, available in CH, CM, SKL, SKH, SKM, and ENH impeller configurations from 2 to 5 stages.

GE premium-efficiency hollow-shaft motors for vertical turbine pump applications, inverter-duty rated from 20 HP to 100 HP on 16.5-inch bases with 230/460V and 460V options.

Amarillo right-angle gear drives for vertical turbine pump installations, available in S30 through S100A frame sizes with 1:1 ratio for horizontal motor mounting.

Column pipe assemblies, discharge heads, and oil-lubricated lineshafts for vertical turbine pump installations in 6-inch and 8-inch configurations with 10-foot sections.

Above-ground pumping solutions including jet pumps, centrifugal booster pumps, and water injection pumps for surface applications and process systems.

Replacement pump ends and liquid ends from Goulds, Berkeley, AY-McDonald, and Shakti for submersible pump rebuilds and new installations, covering 3/4 HP residential through 75 HP commercial ratings.

Additional items in this category sourced from our full inventory.